In this section, you can check the engine performance and body configuration of the Mahindra Bolero Maxx HD 2.0L VXi AC. Its payload capacity is 2,000 kilograms and its total gross weight is 3895 kilograms. This Maxx HD 2.0L VXi AC pickup comes with a 4-cylinder powerful m2DiCR engine of 2523 cc displacement. This engine can produce a high-end torque of 220 Nm and power of 80 HP. Its axle configuration is 4x2 and its configuration is cabin with body and cabin chassis. This Maxx HD Pickup 2.0L VXi AC has some additional features like side cornering lamps and a height-adjustable driver seat. This 4-wheeler pickup has a load body dimension of 10 x 5.9 ft and the seating capacity is driver plus 2 passengers. It comes with a vehicle warranty of 3 years or 1,00,000 kilometers with a service interval of 20,000 kilometers. It also includes a single dry plate clutch. A 5-speed (5F+1R) manual transmission with a synchromesh gearbox is provided to control Bolero Maxx HD Pickup 2.0L VXi AC. This Maxx HD Pickup 2.0L VXi AC runs on diesel fuel with a total fuel tank capacity of 60 litres. It runs on diesel fuel following BS6 emissions norms and has a maximum speed of 80 kmph. Bolero Maxx HD Pickup 2.0L VXi AC has a leaf springs suspension in both front and rear. It has an anti-roll bar installed in front only. The tyres fitted in Bolero Maxx HD 2.0L VXi AC pickup are radial tyre size of 7R16 LT which gives a ground clearance of 185 Nm. This pickup includes a wheelbase of 3290 mm. The overall dimensions of Bolero Maxx HD Pickup 2.0L VXi AC are 5345 mm (length), 1800 mm (width), height 1950 mm. You can check all the required specifications of Mahindra Bolero Maxx HD Pickup 2.0L VXi AC pickup on the specification page of TrucksBuses.