This section of TrucksBuses gives a detailed analysis on the specifications of the JCB 3DX backhoe loader. This construction equipment comes with a powerful JCB 448 engine of power 49 horsepower and has an engine displacement of 4800 cc. A high-end torque of 240 Nm is produced by its engine. This backhoe loader has a tyre size of 9x16-16PR at the front and 16.9x28-12PR with a total wheelbase of 2170 mm. It has a ground clearance of 310 mm and it has a turning circle diameter of 8640 mm. Talking about its total dimensions it has an overall length of 2870 mm, a transport length of 5900 mm. It has a width over bucket of 2350 mm and the height top of cab is 2870 mm. This backhoe loader comes with a front track of 1860 mm and a rear track of 1730 mm. The JCB 3DX backhoe loader runs on diesel fuel with a total fuel tank capacity of 128 litres. It has a max reach at full height is 1150 mm with a load-over height is 3320 mm. It has a reach at ground 1420 mm with a hinge pin height of 3540 mm and a dump height of 2740 mm. The maximum digging depth of JCB 3DX backhoe loader is 4770 mm. It also has a pump flow of 114 LPM and a hydraulic oil system of 110 litres. You can compare this backhoe loader with its comparative backhoe loader in the compare section of TrucksBuses.