Compare Eicher Pro 6035 XPT vs Scania R500
Compare eicher pro 6035 xpt vs scania r500
Eicher Pro 6035 XPT
Scania R500
Overviewof
| Engine |
VEDX8 |
Scania DC 16 V8, Turbocharged, with inbuilt Retarde |
|
| Axle Configuration |
8x4 |
6x4 |
|
| Transmission |
9-speed (8F+1CR+1R) manual |
14 Speed |
|
| Warranty |
4 Years unlimited Km on engine and gearbox
3 Years unlimited Km on vehicle |
|
|
| Service Interval |
80,000 Km (Oil Change) |
|
|
| Additional |
Hill Start Assist, MBooster+, Cruise Control |
|
|
Engine & Performanceof
| Engine |
VEDX8 |
Scania DC 16 V8, Turbocharged, with inbuilt Retarde |
|
| Fuel Injection System |
Common rail |
|
|
| Clutch |
430 mm dia
Single dry plate |
|
|
| Transmission |
9-speed (8F+1CR+1R) manual |
14 Speed |
|
| Max Speed |
80 Kmph |
80 Kmph |
|
| Emission Norms Compliance |
BS6 |
BS4 |
|
| Fuel Tank Capacity |
Diesel - 315 Litres
Ad blue - 33 Litres |
500 Litres |
|
| Electrical Battery |
24 V, 120 Ah |
|
|
Design & Configurationof
| Wheelbase |
5285 mm |
3778 mm |
|
| Variants |
Cabin and chassis
Cabin with scoop body |
|
|
| Axle Configuration |
4x2 |
6x4 |
|
| Front Suspension |
Parabolic leaf spring |
Parabolic leaf springs suspension |
|
| Rear Suspension |
Bogie suspension |
Air suspension |
|
| Front Axle |
Forged I-beam Reverse Elliot Type
Twin steer axle |
Forged I beam reverse Elliot type |
|
| Rear Axle |
Banjo type, single reduction
RAR 5.29 |
First rear axle: Hub reduction Hypoid gears Axle
Second rear axle: Tandem Bogie Axle |
|
| Anti Roll Bar |
At Front only |
|
|
| Tyres |
11x20 (Nylon) |
295/80 R 22.5 |
|
| Wheelbase |
5285 mm |
3778 mm |
|
| Ground Clearance |
252 mm |
260 mm |
|
| Chassis Flange Width |
90 mm |
|
|
Features & Comfortof
| Steering |
Power steering |
Power Steering |
|
| Steering Adustment |
Tilt and telescopic |
|
|
| Cabin Suspension |
Fully suspended |
|
|
| Driver Seat Type |
6 way adjustable |
|
|
| Quarter Ventilation Glass |
Yes |
|
|
| Instrument Cluster |
Digital
With fuel coaching |
Digital
With on board diagnostics |
|
| Mobile Charging Point |
Yes |
Yes |
|
Safetyof
| Service Brakes |
Air brakes
With APDA |
|
|
| Parking Brakes |
Pneumatically operated |
|
|
| Tubeless Tyres |
Optional |
Yes |
|
| Reverse Parking Buzzer |
Yes |
|
|
Key Comparison of Eicher Pro 6035 XPT vs Scania R500
Compare Eicher Pro 6035 XPT vs Scania R500 in detail at TrucksBuses.com ! You can check detailed truck comparison of Eicher Pro 6035 XPT with Scania R500 on the basis of engine, specifications, payload, price, mileage and features. Eicher Pro 6035 XPT with a gross weight of , gives a power of whereas Scania R500 produces of power and comes with a GVW of . Powering the Eicher Pro 6035 XPT truck is cylinder, engine whereas Scania R500 gets powered by a cylinder, engine.