Side-by-side comparison

Compare Mahindra Alfa DX CNG vs Atul Auto Gem Paxx CNG

Compare key specs, then get dealer offers on the model that fits your load & budget.

  • Engine & GVW
  • Payload & mileage
  • Features & safety
  • Best price offers
Mahindra Alfa DX CNG

Mahindra Alfa DX CNG

View details
Atul Auto Gem Paxx CNG

Atul Auto Gem Paxx CNG

View details
Mahindra Alfa DX CNG

Mahindra Alfa DX CNG

Tap for full model page

Atul Auto Gem Paxx CNG

Atul Auto Gem Paxx CNG

Tap for full model page

Orange rows = different. Left vs right shows both models at once.

Overviewof

Power 9.5 HP 9.85 HP@5750 rpm
Torque 23 Nm@2000 - 2400 Nm 14.7 Nm@2700-3300 rpm
Transmission 5 Speed 4 Speed (4F+1R)
Seating Capacity D+3

Ready to choose?

Get on-road price offers from dealers for the model that wins on your key specs.

Engine & Performanceof

Engine 4 Stroke Single Cylinder
Power 9.5 HP@3600 rpm 9.85 HP@5750 rpm
Torque 23 Nm@2000 - 2400 Nm 14.7 Nm@2700-3300 rpm
Engine Cylinders 1
Engine Displacement 395 cc 199 cc
Transmission 5 Speed 4 Speed (4F+1R)
Gearbox Constant mesh
Clutch Multi plate weight clutch Multi plate wet type
Emission Norms Compliance BS6 BS6
Fuel Type CNG CNG
Fuel Tank Capacity 40 L CNG - 40 Litres
Petrol - 2.8 Litres

Design & Configurationof

GVW 860 Kg 810 Kg
Seating Capacity D+3 D+3
Front Suspension Helical compression spring and Damper
Rear Suspension Helical compression spring and Damper
Tyres 4.50x10 4.5x10, 8 PR
Wheelbase 2005 mm 1925 mm
Ground Clearance 175 mm 255 mm
Overall Length 3025 mm 2990 mm
Overall Width 1480 mm 1480 mm
Overall Height 1930 mm 1830 mm

Features & Comfortof

Steering Handle Bar Handle Bar
Steering Adjustment No No
Driver Seat Standard Standard

Safetyof

Service Brakes Hydraulic dual circuit with TMC

Key Comparison of Mahindra Alfa DX CNG vs Atul Auto Gem Paxx CNG

Compare Mahindra Alfa DX CNG vs Atul Auto Gem Paxx CNG at TrucksBuses.com on specifications, features and price to decide which commercial vehicle fits your use case. Review power, capacity and price below to match the model to your application.