Side-by-side comparison

Compare Bajaj Maxima C Diesel vs Mahindra Alfa Plus

Compare key specs, then get dealer offers on the model that fits your load & budget.

Engine & GVW
Payload & mileage
Features & safety
Best price offers

Bajaj Maxima C Diesel

View details

Mahindra Alfa Plus

View details

Mahindra Alfa Plus

Tap for full model page

Orange rows = different. Left vs right shows both models at once.

Overviewof

Body Size	10.5 ft	5.7 x 4.8 ft
GVW (Kg)	965 Kg	995 Kg
Payload	430 Kg	505 Kg
Power	9 HP	7.4 HP@3600 rpm
Range	30 - 33 Kmpl
Torque	23 Nm@2000 rpm	18 Nm@2000-2400 rpm
Transmission	4 Speed (4F+1R)	4 Speed (4F+1R)
Variants	Cabin with body	Cabin with body
Warranty	3 Years or 100,000 Km	2 Years

Ready to choose?

Get on-road price offers from dealers for the model that wins on your key specs.

Engine & Performanceof

Clutch	Dry single plate
Emission Norms Compliance	BS6	BS6
Engine	470 cc	Direct Injection (DI), Air cooled
Engine Cylinders	1	1
Engine Displacement	470 cc	436 cc
Fuel Tank Capacity	8 Litres	10.5 Litres
Fuel Type	Diesel	Diesel
Gradeability	18%
Power	9 HP@3400 rpm	7.4 HP@3600 rpm
Torque	23 Nm@2000 rpm	18 Nm@2000-2400 rpm
Transmission	4 Speed (4F+1R)	4 Speed (4F+1R)

Design & Configurationof

Ground Clearance	193 mm	175 mm
GVW	965 Kg	995 Kg
Overall Height	1818 mm	1700 mm
Overall Length	3230 mm	3175 mm
Overall Width	1493 mm	1460 mm
Payload	430 Kg	505 Kg
Seating Capacity	Driver only	Driver only
Turning Circle Diameter	7.6 m	7.6 m
Tyres	4.5x10, 8 PR	4.5x10, 8 PR
Vehicle Configuration	Cabin with body	Cabin with body
Wheelbase	2125 mm	2165 mm

Features & Comfortof

Driver Seat	Standard	Standard
Steering	Handle Bar	Handle Bar
Steering Adjustment	No	No

Safetyof

Parking Brakes	Yes
Seat Belts	No	No
Service Brakes	Drum brakes	Drum brakes

Key Comparison of Bajaj Maxima C Diesel vs Mahindra Alfa Plus

Compare Bajaj Maxima C Diesel vs Mahindra Alfa Plus at TrucksBuses.com on specifications, features and price to decide which commercial vehicle fits your use case. Review power, capacity and price below to match the model to your application.

Keep comparing