Side-by-side comparison

Compare Atul Auto Gem Paxx CNG vs Mahindra Alfa DX CNG

Compare key specs, then get dealer offers on the model that fits your load & budget.

  • Engine & GVW
  • Payload & mileage
  • Features & safety
  • Best price offers
Atul Auto Gem Paxx CNG

Atul Auto Gem Paxx CNG

View details
Mahindra Alfa DX CNG

Mahindra Alfa DX CNG

View details
Atul Auto Gem Paxx CNG

Atul Auto Gem Paxx CNG

Tap for full model page

Mahindra Alfa DX CNG

Mahindra Alfa DX CNG

Tap for full model page

Orange rows = different. Left vs right shows both models at once.

Overviewof

Power 9.85 HP@5750 rpm 9.5 HP
Torque 14.7 Nm@2700-3300 rpm 23 Nm@2000 - 2400 Nm
Transmission 4 Speed (4F+1R) 5 Speed
Seating Capacity D+3

Ready to choose?

Get on-road price offers from dealers for the model that wins on your key specs.

Engine & Performanceof

Engine 4 Stroke Single Cylinder
Power 9.85 HP@5750 rpm 9.5 HP@3600 rpm
Torque 14.7 Nm@2700-3300 rpm 23 Nm@2000 - 2400 Nm
Engine Cylinders 1
Engine Displacement 199 cc 395 cc
Transmission 4 Speed (4F+1R) 5 Speed
Gearbox Constant mesh
Clutch Multi plate wet type Multi plate weight clutch
Emission Norms Compliance BS6 BS6
Fuel Type CNG CNG
Fuel Tank Capacity CNG - 40 Litres
Petrol - 2.8 Litres
40 L

Design & Configurationof

GVW 810 Kg 860 Kg
Seating Capacity D+3 D+3
Front Suspension Helical compression spring and Damper
Rear Suspension Helical compression spring and Damper
Tyres 4.5x10, 8 PR 4.50x10
Wheelbase 1925 mm 2005 mm
Ground Clearance 255 mm 175 mm
Overall Length 2990 mm 3025 mm
Overall Width 1480 mm 1480 mm
Overall Height 1830 mm 1930 mm

Features & Comfortof

Steering Handle Bar Handle Bar
Steering Adjustment No No
Driver Seat Standard Standard

Safetyof

Service Brakes Hydraulic dual circuit with TMC

Key Comparison of Atul Auto Gem Paxx CNG vs Mahindra Alfa DX CNG

Compare Atul Auto Gem Paxx CNG vs Mahindra Alfa DX CNG at TrucksBuses.com on specifications, features and price to decide which commercial vehicle fits your use case. Review power, capacity and price below to match the model to your application.