Side-by-side comparison

Compare Keto EP 1 vs Piaggio Ape E-City FX

Compare key specs, then get dealer offers on the model that fits your load & budget.

  • Engine & GVW
  • Payload & mileage
  • Features & safety
  • Best price offers
Keto EP 1

Keto EP 1

View details
Piaggio Ape E-City FX

Piaggio Ape E-City FX

View details
Keto EP 1

Keto EP 1

Tap for full model page

Piaggio Ape E-City FX

Piaggio Ape E-City FX

Tap for full model page

Orange rows = different. Left vs right shows both models at once.

Overviewof

Power 6.7 HP 7.3 HP
Torque 29 Nm
Transmission PT gear with differential (Integral)
Seating Capacity D+3 D+3
Warranty 3 Years
Additional 100 to 130 Km range 110 Km range
3 hr 45 min charging time
48 V / 3000 W Off-board charger

Ready to choose?

Get on-road price offers from dealers for the model that wins on your key specs.

Engine & Performanceof

Engine Electric Motor, 5000W Electric Motor
Power 6.7 HP 7.3 HP
Torque 29 Nm
Transmission PT gear with differential (Integral)
Gradeability 30 degree 19%
Max Speed 45 Km/Hr 45 Km/Hr
Emission Norms Compliance Green Vehicle
Fuel Type Electric Electric
Electricals Battery 168 to 224Ah Lithium-ion, 51.2V
7.5 KwH

Design & Configurationof

GVW 820 Kg 713 Kg
Seating Capacity D+3 D+3
Front Suspension Fork dampers Coil spring
With Hydraulic dampner
Rear Suspension Spring and dampers Semi trailing arm
Rubber spring with hydraulic dampener
Tyres 12 inches 4.0 - 8
Wheelbase 2500 mm 1920 mm
Ground Clearance 155 mm 163 mm
Overall Length 3130 mm 2700 mm
Overall Width 1315 mm 1370 mm
Overall Height 1800 mm 1725 mm

Features & Comfortof

Steering Handle Bar Handle Bar
Steering Adjustment No No
Driver Seat Standard Standard

Safetyof

Service Brakes Front Disc
Rear Drum
Drum brakes
Hydraulically actuated
Seat Belts No

Key Comparison of Keto EP 1 vs Piaggio Ape E-City FX

Compare Keto EP 1 vs Piaggio Ape E-City FX at TrucksBuses.com on specifications, features and price to decide which commercial vehicle fits your use case. Review power, capacity and price below to match the model to your application.